Using iPhone as a modem. How to use iPhone as a modem


An iPhone can be used as a modem that distributes mobile Internet to other devices. Using Modem Mode, an iPhone can distribute the Internet to a computer, smartphone or tablet, which is sometimes very convenient. Distribution to a computer can occur via a USB cable or wireless Wi-Fi and Bluetooth. It is not possible to distribute the Internet to other phones via cable, only wirelessly.

Today's issue:

If you decide to use Modem Mode and connect a computer or other devices to your iPhone to transfer the Internet to them, then first you need to:

  • Have an iPhone 3G or higher (not)
  • It is desirable that the speed be good

If the Internet is connected and your Safari browser accesses Internet pages, then let’s start setting up and enabling Modem Mode.

Modem mode is in the iPhone settings, launch the Settings application and look. If there is a Modem Mode section in the main menu or in the settings of the Cellular section, it means that the modem mode was enabled when setting up the Internet on the iPhone.

How to set up tethering mode on iPhone

Why is there no Modem Mode in Settings or in the Cellular section? Because it needs to be configured, and it will appear, provided that your cellular operator supports this feature.


We will configure the modem mode using the example of the Tele2 operator. Launch the standard Settings application - Cellular - turn on Cellular Data and go to Data Settings


Select Cellular Data Network and scroll to the very bottom, where the Modem Mode settings are located and enter the APN – internet.tele2.ru (Setting the Modem Mode for Tele2, I tried writing just internet, it also works).

Each operator and each country has its own settings; you can find them on the website or by contacting the support service of your cellular operator. Sometimes discussions of your region’s settings profile can be found using Internet search engines, enter “ Modem APN mode and the name of your operator and country».

After entering the APN settings for Modem Mode, go to and exit the Cellular section several times (located in the main menu of the settings application), if Modem Mode does not appear, then .

How to distribute Internet from iPhone to computer


The first thing we will learn is how to connect the Internet to a computer via an iPhone using a USB cable using Modem Mode. Before we begin, make sure Cellular data is turned on on your phone (found in Settings - Cellular).


Connect the iPhone to the computer using a USB cable. It is advisable to use a native USB cable, as there may be problems with low-quality replicas. Go to Settings – Modem mode – turn on the Modem mode toggle switch and click – USB only.

That's it, the iPhone distributes its mobile Internet to the computer via USB. Fast and convenient. Open a browser on your computer and try to access any page on the Internet. Tested on Windows 7 and Mac OS X El Capitan. If for some reason the Internet does not appear on the computer, then (preferably) or a separate file AppleMobileDeviceSupport.msi (contains drivers for iPhone). Sometimes it helps to disable the firewall or antivirus on your computer, which can block traffic.

Distributing Internet from iPhone via Wi-Fi to other devices

In this case, we use the iPhone as a wireless modem that distributes the Internet via Wi-Fi. The advantage of this method is that neither a USB cable nor iTunes is needed. The only requirement is the presence of a Wi-Fi module in the device that will receive the Internet from the iPhone (be it a tablet, phone or computer).

The process of enabling mobile hotspot on iPhone is simple. Go. As in the previous example, make sure that Cellular Data is turned on on your iPhone (2).


To enable the access point, select in Settings – Modem mode (3) – Enable Modem mode (4). In principle, at the 4th point the access point in the iPhone will be turned on, but if the phone is connected to the computer at this time, you will need to additionally click – Turn on Wi-Fi and Bluetooth (5).

Modem mode on iPhone - what is the password?

The iPhone is ready to distribute the Internet via Wi-Fi and Bluetooth, using Modem Mode, the phone has become an access point. All that remains is to connect devices that need the Internet, for this you also need to turn on Wi-Fi, find your iPhone in the list of devices and connect to it using a password, the password for the iPhone hotspot can be found here: Settings - Modem mode - Wi-Fi password. In the same section, you can change your iPhone hotspot password. Just don’t set a password like in our example in the picture, otherwise it can be easily guessed and used by strangers.

We connect a computer with Windows 7, 8 to an iPhone Wi-Fi access point


Having turned on the modem mode in the iPhone, and having figured out the access point password, we will distribute the Internet to a computer running Windows via a Wi-Fi network. The network will be organized between the iPhone and the computer. Turn on Modem Mode on your iPhone and select – Turn on Wi-Fi and Bluetooth. On a computer with Windows 7 or 8, at the bottom, near the clock, click the Wi-Fi icon (1), select iPhone (2), click Connect (3), enter (4) and click OK (5). Mobile Internet from the iPhone via Wi-Fi went to the PC, now you can access the network from it.

If, after entering the password, the PC cannot connect to the iPhone, despite entering the correct password, then in Windows 7, by clicking on the Wi-Fi icon, select Network and Sharing Center - Manage Wireless Networks - and remove iPhone from the list (right-click – Delete network), then try to establish a connection again. In Windows 8, in this case, in the list of Wi-Fi networks, right-click on the iPhone - Forget this network.

We connect a computer with Mac OS to Wi-Fi via iPhone


iPhone modem mode is enabled. To connect a Mac OS computer to an iPhone wireless access point and use its Internet, you need to in Mac OS, in the upper right corner, click on the Wi-Fi icon (1) – Enable Wi-Fi (2) – Select the iPhone with the icon from the list modem mode (two rings) – lead – press Connect (5). We use the Internet.

You can make a wi-fi router out of an iPhone and distribute the Internet to other devices. Very useful if you are far from home if your laptop does not have a 3G modem. In this article we will talk about how to enable iPhone tethering mode, as well as some problems that you may encounter in the process.


After this, the mobile device will turn into a mobile access point and begin to “distribute” the Internet. You can connect to it via Wi-Fi using the password that is displayed in the mode settings.

Be careful: the enabled wi-fi modem mode is not displayed anywhere. But the battery on your phone drains faster.

When another device connects to you, you will see this message in the status panel.


Setting up another device connection

To connect to the created Wi-Fi network from another device, go to the network settings on this device. Select the name of the wi-fi point that you specified in the settings. And enter the access password.

This is what connecting to an iPhone on a MacBook looks like. On other devices, the connection icons will be identical.

It is worth highlighting several main features of using modem mode:

  • Don't expect high speeds, since the Internet connection is via a mobile network.
  • When modem mode is activated, the autonomy of the mobile device is slightly reduced.
  • Some mobile operators may impose some restrictions on the number of simultaneous connections to one device.

What to do if modem mode on iPhone cannot be activated

In some cases, to activate modem mode, users will have to make a number of additional settings. It depends on the cellular operators. In particular, here is an article on how to enable yota modem mode. The general principle is this:

Mobile operator data:

Russia

Beeline / Beeline

  • APN: internet.beeline.ru
  • Username: beelin
  • Password: beeline

MTS / MTS Russia

  • APN: internet.mts.ru
  • Username: mts
  • Password: mts

MegaFon / MegaFon

  • APN: internet
  • Username: gdata
  • Password: gdata

Tele2 / Tele2 Russia

  • APN: internet.tele2.ru
  • Password: leave blank
  • APN:yota
  • Username: yota
  • Password: yota

Ukraine

Kyivstar

  • Username: leave blank
  • Password: leave blank

Lifecell Ukraine

  • APN: internet
  • Username: leave blank
  • Password: leave blank

MTS Ukraine

You can clarify your APN data by calling 111 for MTS Ukraine users.

How often does the need arise, but you cannot access the Internet due to the lack of Wi-Fi nearby? Not everyone knows that in order to set up a general mode for using the Internet, a regular and most inexpensive tablet may be suitable, which has a 3G function via a simple SIM card.

I agree that it is undoubtedly easier to watch videos or read email on a big screen. You don't have to be within WiFi range to do this. So how can I share wifi with my friends from my iPhone 5s? It's not difficult at all. Your iPhone 5S can easily be set to modem mode and you will also know how to set it up.

Since almost all Apple gadgets have the same iOS operating system, the process of enabling modem mode on various iPhone and iPad models is no different. The only requirement is that your smartphone has 3G Internet functionality. The fifth iPhone can easily distribute the Internet to other devices, since it is equipped with a cellular module. Here you will learn how to set up the mode and distribute wifi from iPhone 5s.

First, check if the “Cellular Data” function is turned on; if not, turn on the “Enable 3G/4G LTE” option. To do this, open the “Settings” tab on the main menu, where select the “Cellular” function in the iPhone 5s.

Now open the “Tethering Mode” feature on your Iphone 5s and launch it. If the device asks you to turn on the Bluetooth function, activate it. The screen will tell you to enable the “Tethering Mode” feature, something like this.

Connect automatically

We correctly enter the Wi-Fi connection password you know and now you can connect to Wi-Fi and distribute the Internet. If your fifth iPhone has already connected to the required wireless network, then the Mac function itself will automatically connect you from the keychain.

Also, be sure to remember to connect your laptop or tablet to the network in advance. Now you can tell your friends how to distribute Wi-Fi from an iPhone.

What to do if modem mode on iPhone disappears

To resume the modem function, go again on your iPhone 5s to the main menu in “Settings” and select the “General” function, then turn on the “Cellular Data” mode. Next, in “Cellular Data”, select the option to enable “Modem Mode”.

The process is almost complete, but we return to “Settings” again and make sure that “Modem Mode” is still turned on. If that doesn't work, try rebooting your iPhone and running the mode again through Settings to restore the missing modem mode.

How to run “modem mode” via USB as a 3G or LTE modem?

You need to know that to use the iPhone 5 se in modem mode via a USB cable, you need to use preferably the original charging cable, and in Windows 10, 8 or Windows 7, Apple iTunes must be installed, which can be downloaded for free from the official website, and what does it have to do with it? The version must be the latest, in the worst case the connection may not appear.

If everything is ready and “Modem Mode” is enabled on the iPhone 5, you just need to connect it via a USB connector to your computer. If by this time the question “can you trust this computer?” suddenly appears on your smartphone screen? (it usually appears during the initial connection), answer “Yes”, otherwise the modem mode will not work and will have to be configured again.

Now you need to do the same steps again and activate the above mode, but only if you connect the iPhone via a USB cable to your computer.

So, we connect the iPhone 5 s to the computer again, having previously turned on “Modem Mode” on the smartphone. Check that iOS on your iPhone is recognized. Then go into System Preferences and turn on the Network feature.

With the next tap, use the “USB to iPhone” function. If you find this option, try clicking the icon and it will be added immediately. Soon a new connection will appear on the screen and the Internet will work via the local “Apple Mobile Device Ethernet” network. However, just in case, check the “Network and Sharing Center” item in the main menu for a list of all connections on your computer. If there is no connection, then try clicking the “Activate service” function.

How to connect a modem via USB on a Windows computer?

Make sure iTunes is updated to the latest version. Now you need to connect your iPhone 5s with the “Modem Mode” function activated to the computer by connecting the USB cable. On a computer with Windows OS: you need to select and click the “Bluetooth” icon and then select “Add a Bluetooth device”, and then follow the instructions that you will read on the computer screen.

How to enable tethering mode via Bluetooth?

To connect your iPhone 5s as a modem via Bluetooth, you need to create a pair between your devices. To do this, on your iPhone, activate the “Modem Mode” function, go to the “Settings” section and select the “Bluetooth” function.

Leaving the iPhone screen open, connect the modem to another source, for which, on the connected device, select the “Modem Mode” function to create a pair of devices. Next, on your computer (tablet), select the “System Preferences” function in the Apple menu and activate the “Bluetooth” mode. And finally, opposite the name of the device to be connected, click “Create a pair.”

Connecting a Mac or Windows Computer

To achieve this goal, you need to select the icon in the “Menu” bar on your Mac device. Next, activate your iOS device by enabling the “Modem Mode” function and select the “Connect to Network” function.

Then, in the “System Settings” section, select the “Network” function and confirm the connection. If you can't connect right away, try again.

How turn on and set up modem mode on your own iPhone

I think many of you have been in a situation where you have an ordinary PC or laptop nearby, but there are no access points to the Internet. How to upload photos to iPhone 3G, 3GS, 4, 4S, 5 -. And with all this, access to the network is very necessary specifically from a computer. Here iPhone How to set up Google Play Services and Play Market on How to install. If you have your own iPhone, then it will help you solve this problem using the modem function.

In this article we will talk about how turn on modem mode, if you have it in the settings. How to enable modem mode on iPhone and iPad (Instructions. Video instructions: 5 ways to make a Wi-Fi router from a laptop on Windows 8: There are also cases when this item is simply hidden in the menu, and if you have a similar case , then you will learn how to return this setting. The only thing that will be useful is access to the network on your own iPhone (preferably unlimited, because you simply will not notice how you will go into a big minus on your balance).

How to enable mode modem on iPhone

To do this, follow the following annotation:

  1. Enter "Settings".
  2. Click “Cellular Communications” and there are two options for the development of events: you see the item “ Mode modem” or not, but we’ll talk about that later.
  3. Go to Cellular Data Network. How to enable tethering mode on iPhone. It often happens that this setting is at the very bottom, so scroll to the very bottom. How to enable tethering mode on iPhone 5s. How to enable tethering mode on iPhone 5? +VIDEO. How to turn on mobile phone how to turn it off on “iPhone At home I put the phone down for 10 minutes. Then you will see blank fields “Name, APN password”. Modem Mode allows Help when using the Modem Mode function to suit you. You must enter at least some user name (this will be completely enough).
  4. Now the active “Modem mode” should appear in the settings. After the actions taken on screen A, how to remove the button on iPhone 5 or. I transfer data from iPhone 5 to the new 6. That is, I need to start iPhone 6 as new. If it is inactive, then go to the “Cellular Communications” item again and turn on the modem.
  5. “Modem mode” is enabled and all that remains is to connect to it through another device and use the Internet.

Setting up the function via Wi-Fi, Bluetooth or USB

Apple developers took care of their own users in advance and made it so that they can distribute access to the World Wide Web via Wi-Fi, Bluetooth or USB, which is quite comfortable and simple. Let's take a closer look at any of the methods.

 

It might be useful to read: